Device Technologies, Inc.

Device Technologies, Inc.Request A Quote

Southborough, MA | 508-229-2000

https://www.devicetech.com/products/edge-seals-and-plate-seals-solutions/seal-fast-edge-seal/

DTi offers best in class grommet edging wire protection, edge trim, enclosure/door seals, cable/fiber management & metal coating services. Request free samples on site. Since 1984 we’ve supported manufacturers in commercial & military aerospace, rail, auto, IT/data centers, telecom, HVAC, medical & power.

* Grommet edging: Spring-Fast® prevents data loss from chafe. It replaces the old, slow & costly multi step glue process used with nylon grommets. It delivers proven best in class performance with 49% lower install costs & a 9.5X efficiency improvement. Highly effective self locking nylon clad metal substrate snaps onto an edge with finger pressure.

*Seals: Seal-Fast seals protect your vital equipment from weather, temperature, dust or moisture. Its single piece construction snaps on easily with strong edge retention. 100’s of U.S. produced off the shelf profiles available in PVC/EPDM, EPDM, and Silicone with/out a steel substrate.

*Cable management: Fast-Drop® radius control modules aka cable waterfalls prevent data loss & help you access, organize, rewire & troubleshoot fiber networks to save time & money. The patented clip on design makes it faster to modify existing racks or set up new racks.

* Protect-Fast sleeving & wrap is a tough, lightweight flexible containment & protection solution that protects wires, wire harnesses, cables or hoses from abrasion & cutting. They help in troubleshooting & refitting. General or Advanced Use products available.

*Wire coating Services include polymer/powder magnet wire or for functional/decorative applications. Traditional enamel magnet wire & Kapton tape wrapping, and high temperature magnet wire for HEV/EV motor winding/high draw applications.

DTi-GmbH is DTi’s European hub. Contact Meike Kurzak in Hamburg +49 40 350 85 128

Certifications: UL94 V-0, FAR 25.853, Mil-Std-1344, RoHS, BICSI, NEBS, & DFARS.

ISO 9001:2015 & AS 9100-D

Order free samples on site or call us today.

Rubber Molding Power Pages

Compression Molding

Molding is a manufacturing process that uses a mold - the latter being a solid container used to give shape to a piece of material. It is a forming process. The form is transferred from the mold to the material by...

Grommet Edging

Grommet edging protects electrical cables, wires and other sensitive components from abrasion and chafing as they pass through or over rough or sharp edges or surfaces. Chafing can lead not only to loss of data and operational...

Rubber Injection Molding

Rubber injection molding is when uncured rubber is transformed into a usable product by injecting raw rubber material into a mold cavity made of metal. The applied pressure produces a chemical reaction like...

Rubber Latches

Rubber latches are latches made of rubber or are composed of rubber components. They are used in the automotive, aerospace, and medical equipment industries due to their flexibility, durability, and non-abrasive properties...

Rubber Molding

Rubber molding is a process of transforming uncured rubber or an elastomer into a usable product by transferring, compressing, or injecting raw rubber material into a metal mold cavity...

Rubber Overmolding

There are several methods to perform rubber overmolding, and each method has its own unique advantages and disadvantages. The choice of method typically depends on the design and material requirements of the product being...

Silicone Rubber Molding

Silicone rubber molding is a method for shaping, forming, and fabricating silicone rubber parts and products using a heated mold. The process involves compressing or injecting silicone rubber into a mold where it takes the shape and form of the mold cavity...

Rubber Bushings

A rubber bushing is a form of vibration isolator that is placed between two parts to limit the motion between them and absorb, mollify, and buffer the energy produced by their interaction. They are very...

Rubber Extrusion

Extruded rubber is a group of products made by softening and pressurizing an elastomeric compound and forcing it to flow through a hard tool called a die. The resulting product is a continuous piece of material that has the same cross-section throughout its length...

Rubber Gaskets

Rubber gaskets are elastic components used for mechanically sealing the microscopic gap between two mating surfaces or joints. Examples of these surfaces are flange faces of piping and fittings, mating surfaces of an...

Rubber to Metal Bonding

Rubber to metal bonding is when a rubber part has to be adhered to a metal part, a metal component is chemically prepared and is attached or encapsulated as part of the process to become a bonded rubber part...

Urethane Casting

Urethane casting is the process of injecting polyurethane and additive resins into a soft mold usually made of silicone elastomer. The casting process is similar to injection molding; injection molding differs by using hard, metal molds...

Device Technologies, Inc.